How to identify the quality of plastic buckets in the end?

2023-03-31

245

1, see whether the product manufacturer has the relevant production license, such as dangerous goods packaging products license.

2、 Look at the raw materials used in the production of plastic barrels, should be the best new material material.

3, carefully check and understand the mechanical strength of plastic barrels, heat resistance, solvent resistance and other performance indicators are in line with the requirements of the relevant standards.

4、 Pay attention to the appearance quality of the product, including color, integrity, luster, etc.

5, can knock the plastic barrel products to listen to the sound, can be drawn to see the elongation of the product.

Avoid cracking of different colour plastic plastic paint pail 18L China during processing?

none

Related Information

Reasons for high temperature in plastic drum manufacturing

Plastic drum oil tank volume is too small, cooling area is not enough, cooling device but its capacity is too small. Climate and operating environment temperature is high, resulting in higher oil temperature. Improper selection of oil viscosity, viscosity of large viscous resistance, viscosity is too small, the leakage increases, both cases can cause heat temperature rise.

2023-03-31

154

How to clean the dirt inside the plastic drum?

How do I clean the dirt out of a plastic bucket? If a large plastic bucket is dirty, people can go in and clean it. Many cleaning utensils cannot be used for open plastic buckets. How to clean and disinfect is a headache. Tianjin plastic bucket manufacturers have compiled some ways to clean plastic buckets, hope it will be helpful to you. Come and take a look.

2023-03-31

354

Avoid cracking of different colour plastic plastic paint pail 18L China during processing?

Different colour plastic plastic paint pail 18L China are used in many places in our daily lives,with the continuous development of the social economy.

2023-04-25

545

Online Message

Products

Plastic Jug/ barrel

Plastic pail/bucket

Office Address: Room518,No.1339,Tongfa Avenue, ChangQing District, Jinan City,Shandong,China

Factory Address1: No.31 Huahua Street, Binhai New Area Development Zone, Tianjin,China

Factory Address2：No.3, North Section of Jixiang Road, WenShang country, Jining, Shandong Province,China

Email:leaderexportcn@gmail.com

Tel:86-13188878668

Label | Business license

News